Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 145

NOTE: Configuring Console Keyboard Layout
By clicking the Save button as described in
console keyboard layout takes place at the same time. If you want to change
the console keyboard layout, either call yast keyboard (the text mode in-
terface) or check the KEYTABLE and YAST_KEYBOARD settings in /etc/
sysconfig/keyboard.
8.3.2 Mouse Model
The mouse is usually detected automatically, but you can set up your mouse model
manually if the automatic detection fails. Refer to the documentation of your mouse
for a description of the model. If you want to modify your mouse configuration, proceed
as follows:
1 In YaST, click Hardware > Mouse Model. The SaX2 configuration tool reads
the system resources and displays the Mouse Properties dialog.
2 Click Change and select your mouse model from the list displayed.
3 Click OK to leave the configuration dialog and apply your changes with Save.
In the Options part of the dialog, set various options for operating your mouse.
Activate 3-Button Emulation
If your mouse has only two buttons, a third button is emulated whenever you click
both buttons simultaneously.
Activate Mouse Wheel
Check this box to use a scroll wheel.
Invert X-Axis / Invert Y-Axis
Check these options if you want to change the direction in which the mouse
pointer moves.
Activate Left-Hand Button Mapping
Check this box to make the button mapping suitable for left-hand usage.
Step 7 (page 132) the setup of the
Setting Up Hardware Components with YaST 133