Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 235

1 Start the KDE file and Web browser Konqueror.
2 Enter service://yast.installation.suse in the location bar. The
target system then appears as an icon in the Konqueror screen. Clicking this icon
launches the KDE VNC viewer in which to perform the installation. Alternatively,
run your VNC viewer software with the IP address provided and add :1 at the
end of the IP address for the display the installation is running on.
Connecting to the Installation Program
Basically, there are two ways to connect to a VNC server (the installation target in this
case). You can either start an independent VNC viewer application on any operating
system or connect using a Java-enabled Web browser.
Using VNC, you can control the installation of a Linux system from any other operating
system, including other Linux flavors, Windows, or Mac OS.
On a Linux machine, make sure that the package tightvnc is installed. On a Windows
machine, install the Windows port of this application, which can be obtained at the
TightVNC home page (http://www.tightvnc.com/download.html).
To connect to the installation program running on the target machine, proceed as
follows:
1 Start the VNC viewer.
2 Enter the IP address and display number of the installation target as provided by
the SLP browser or the installation program itself:
ip_address:display_number
A window opens on your desktop displaying the YaST screens as in a normal
local installation.
Using a Web browser to connect to the installation program makes you totally indepen-
dent of any VNC software or the underlying operating system. As long as the browser
application has Java support enabled, you can use any browser (Firefox, Internet Ex-
plorer, Konqueror, Opera, etc.) to perform the installation of your Linux system.
To perform a VNC installation, proceed as follows:
Remote Installation 223