Groupwise Check Error Codes - Novell GROUPWISE 7 - TROUBLESHOOTING 1 Troubleshooting Manual

GroupWise Check Error Codes

1 6
GWCheck generates two sets of numeric codes: error codes and problem codes. Both sets of codes
are in the same numeric range, but error codes are clearly labeled as errors, for example, "Error 9".
The GWCheck problem codes are not documented because there is nothing you as an administrator
need to do about the problems GWCheck is reporting. GWCheck fixes these problems for you.
This section contains information about the following numeric codes, which are GWCheck error
codes:
"01 Memory initialization error" on page 253
"02 WPHOST.DB database read error" on page 253
"03 Record read error" on page 253
"04 User record has no DS_HOST_NAME" on page 253
"05 User record has no DS_OBJ_TYPE" on page 253
"06 User record has no DS_FID" on page 253
"07 User record has no DS_USER_NETID" on page 254
"08 User database read error" on page 254
"09 Message database read error" on page 254
"10 Message record read error" on page 254
"11 Unable to start database transaction" on page 255
"12 Record failed commit" on page 255
"13 Record failed modify" on page 255
"14 Record delete failed commit" on page 256
"15 Record failed delete" on page 256
"16 User does not exist in post office" on page 256
"17 Post office does not exist in domain" on page 257
"18 Message database open error" on page 257
"19 WPHOST.DB database open error" on page 257
"20 User record has no DS_DOMAIN_NAME" on page 257
"21 Unable to decrypt database" on page 257
"23 Unable to rename file for rebuild backup" on page 258
"24 Path modify error" on page 258
"25 Database create error" on page 258
"26 Database rebuild error" on page 258
"28 User file already exists or current file inaccessible" on page 259
"29 User database close error" on page 259
"30 User database not found" on page 259
"31 Exclusive access denied to user database" on page 260
16
GroupWise Check Error Codes 251