82Xx Errors - Novell GROUPWISE 7 - TROUBLESHOOTING 1 Troubleshooting Manual

Possible Cause: If this error occurs when starting the GroupWise client, the user might have
Possible Cause: If this error occurs when manually addressing a message to multiple external
Possible Cause: If this error occurs in the GroupWise client in Remote mode, GroupWise might
Possible Cause: This error can occasionally be caused by damaged databases.

2.2 82xx Errors

16 GroupWise 7 Troubleshooting 1: Error Messages
Action: After exiting all the agents, unload the agent engine (gwenn5.nlm), then
perform the update. See
in "Update" in the
exceeded the limit of viewable 65,000 items per folder. Remember that Trash
is considered a folder.
Action: Delete items or move them to a different folder. Empty the Trash.
recipients, the user might have typed one or more addresses incorrectly in such
a way that the client exceeded available memory trying to resolve the
erroneous external addresses. For example, leaving out the at (@) sign can
cause this problem.
Action: Users should select recipients from the Address Book whenever possible. If
users must type external addresses, care should be used to type the addresses
correctly, especially in cases where the number of recipients is large.
not be installed correctly on the remote computer.
Action: Reinstall GroupWise on the remote computer. See the platform-specific setup
instructions for using Remote mode in
GroupWise 7 Administration
Action: Check, and, if necessary, repair databases accessed by the user who is
receiving the error. See
in "Databases" in the
"8200 File I/O error" on page 17
"8201 Access to file denied" on page 17
"8202 Cannot access required file" on page 19
"8203 Cannot copy file or directory" on page 19
"8204 Disk full" on page 20
"8205 End of file" on page 20
"8206 Cannot open file" on page 21
"8207 Cannot locate file" on page 21
"8208 Cannot modify file" on page 22
"8209 Path not found" on page 22
"820B Path too long" on page 24
"820E Cannot lock file" on page 24
"8210 Cannot create path" on page 25
"8211 Cannot rename file" on page 26
"8212 Password incorrect" on page 26
"Updating Your GroupWise 6.x System to Version
GroupWise 7 Installation
"GroupWise
Guide.
"Maintaining User/Resource and Message
GroupWise 7 Administration
Guide.
Modes" in "Client" in the
Databases"
Guide.
7"