Ports; Web Browser - Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION Administration Manual

Many factors should be considered for distances greater than 200 kilometers, some of which
include:
The amount of data being transferred
The bandwidth of the link
Whether or not snapshot technology is being used

4.1.16 Ports

If you are using a firewall, the ports must be opened for OpenWBEM and the Identity Manager
drivers.
Default Ports for the BCC Setup
Table 4-1
Product
OpenWBEM
eDirectory driver
Cluster Resources Synchronization driver
User Object Synchronization driver

4.1.17 Web Browser

When using iManager, make sure your Web browser settings meet the requirements in this section.
"Web Browser Language Setting" on page 46
"Web Browser Character Encoding Setting" on page 46
Web Browser Language Setting
The iManager plug-in might not operate properly if the highest priority Language setting for your
Web browser is set to a language other than one of iManager's supported languages. To avoid
problems, in your Web browser, click Tools > Options > Languages, then set the first language
preference in the list to a supported language.
Refer to the
for information about supported languages.
Web Browser Character Encoding Setting
Supported language codes are Unicode (UTF-8) compliant. To avoid display problems, make sure
the Character Encoding setting for the browser is set to Unicode (UTF-8) or ISO 8859-1 (Western,
Western European, West European).
In a Mozilla browser, click View > Character Encoding, then select the supported character
encoding setting.
In an Internet Explorer browser, click View > Encoding, then select the supported character
encoding setting.
46 BCC 1.1 SP2: Administration Guide for NetWare 6.5 SP8
Novell iManager documentation (http://www.novell.com/documentation/imanager27/)
Default Port
5989
8196
2002 (plus the ports for additional instances)
2001 (plus the ports for additional instances)