Creating Ssl Certificates; Synchronizing Identity Manager Drivers - Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION Administration Manual

6.1.2 Creating SSL Certificates

It is recommended that you create an SSL certificate for the Cluster Resource Synchronization
driver. Creating one certificate creates the certificate for a driver pair. For example, creating an SSL
certificate for the Cluster Resource Synchronization driver also creates the certificate for the Cluster
Resource Synchronization drivers on the other clusters.
To create an SSL certificate:
1 Start your Internet browser and enter the URL for iManager.
The URL is http://server_ip_address/nps/iManager.html. Replace server_ip_address with the
IP address or DNS name of the server that has iManager and the Identity Manager
preconfigured templates for iManager installed.
2 Specify your username and password, specify the tree where you want to log in, then click
Login.
3 In the left column, click Identity Manager Utilities, then click NDS-to-NDS Driver Certificates.
4 Specify the requested driver information for this cluster, then click Next.
You must specify the driver name (including the context) you supplied in
this cluster. Use the following format when specifying the driver name:
DriverName.DriverSet.OrganizationalUnit.OrganizationName
Ensure that there are no spaces (beginning or end) in the specified context, and do not use the
cn=DriverName.ou=OrganizationalUnitName.o=OrganizationName
5 Specify the requested driver information for the driver in the other cluster.
Use the same format specified in
6 Click Next, then click Finish.

6.1.3 Synchronizing Identity Manager Drivers

If you are adding a new cluster to an existing business continuity cluster, you must synchronize the
BCC-specific Identity Manager drivers after you have created the BCC-specific Identity Manager
drivers and SSL certificates. If the BCC-specific Identity Manager drivers are not synchronized,
clusters cannot be enabled for business continuity. Synchronizing the Identity Manager drivers is
only necessary when you are adding a new cluster to an existing business continuity cluster.
To synchronize the BCC-specific Identity Manager drivers:
1 Start your Internet browser and enter the URL for iManager.
The URL is http://server_ip_address/nps/iManager.html. Replace server_ip_address with the
IP address or DNS name of the server that has iManager and the Identity Manager
preconfigured templates for iManager installed.
2 Specify your username and password, specify the tree where you want to log in, then click
Login.
3 In the left column, click Identity Manager, then click the Identity Manager Overview link.
4 Search for and find the BCC driver set.
5 Click the red Cluster Sync icon for the driver you want to synchronize, then click the Migrate
from eDirectory button.
70 BCC 1.1 SP2: Administration Guide for NetWare 6.5 SP8
Step 4.
Step 8 on page 68 for
format.