Resource Script Search-And-Replace Functions Do Not Work; Virtual Ncp Server Ip Addresses Won't Change - Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION Administration Manual

To resolve this problem, edit the resource unload script and change the
NUDP ODEL name ip
connections to close. This makes it much faster.
NOTE: The cluster resource must be brought offline and then back online for changes to the unload
script to take effect. Client data might be lost if clients are accessing the resource when it is brought
offline.
9.18 Resource Script Search-and-Replace
Functions Do Not Work
If resource script search-and-replace functions are not working, the problem might be caused by one
of the following conditions:
You did not click the Apply button on the Properties page. Clicking OK when entering the
scripts does not apply the changes to the directory.
You added the search-and-replace values to the resource instead of to the cluster.
The search-and-replace values to apply to a specific resource instead of all resources in the
cluster.
If you are testing search-and-replace functionality, you might have made the changes too
rapidly.
Identity Manager merges all changes into one, so if you quickly add a change and then delete it,
Identity Manager might view it as no change. You should make a change and verify that the
change has synchronized with the other cluster before deleting it.
9.19 Virtual NCP Server IP Addresses Won't
Change
If the IP address for a virtual (NCP) server does not change properly, the problem might be caused
by one of the following conditions:
The IP address has been changed only on the load and unload script pages.
You must also change the IP address on the protocols page for the virtual server. Changing the
IP address on the protocols page causes the load and unload scripts to automatically update.
The virtual server has an extra IP address.
IP address changes should always be made on the Protocols page of the iManager cluster plug-
in, not in load and unload scripts.
This is the only way to change the IP address on the virtual NCP server object in eDirectory.
On NetWare, you can also use the General tab in ConsoleOne
virtual server. If there are extra IP addresses, do the following:
1. In ConsoleOne, click Page Options and disable the General tab.
2. Click Cancel to exit the properties dialog box.
3. Access the properties dialog box again.
4. Click the Other tab and delete the extra IP addresses.
110 BCC 1.1 SP2: Administration Guide for NetWare 6.5 SP8
. Unlike the command, the
DEL
NUDP DEL name ip
command does not wait for all NCP
ODEL
®
to view the IP addresses for the
line to