<idlePriorityThreshold>3</idlePriorityThreshold>
<initialNormalThreads>3</initialNormalThreads>
<initialPriorityThreads>2</initialPriorityThreads>
<ipcResponseTimeout>15</ipcResponseTimeout>
<maximumPriorityThreads>20</maximumPriorityThreads>
<minimumPriorityThreads>2</minimumPriorityThreads>
<resourceOfflineTimeout>300</resourceOfflineTimeout>
<resourceOnlineTimeout>300</resourceOnlineTimeout>
<scanForNewDevicesDelay>5</scanForNewDevicesDelay>
</bccSettings>
Table 10-3
Table 10-3
Setting
<adminGroupName>
<authorizationCacheTTL>
<cimConnectTimeout>
<cimReceiveTimeout>
<cimSendTimeout>
<idlePriorityThreshold>
<initialNormalThreads>
<initialPriorityThreads>
<ipcResponseTimeout>
<maximumPriorityThreads>
<minimumPriorityThreads>
<resourceOfflineTimeout>
<resourceOnlineTimeout>
<scanForNewDevicesDelay>
118 BCC 1.1 SP2: Administration Guide for NetWare 6.5 SP8
provides additional information on each setting:
BCC XML Settings
Description
The name of the LUM-enabled group that
BCC uses on Linux.
The number of seconds the authorization
rights are cached in the BCC OpenWBEM
provider.
BCC CIM client connect timeout in seconds.
BCC CIM client receive timeout in seconds.
BCC CIM client send timeout in seconds.
The number of idle high priority threads before
BCC starts killing priority threads.
The number of normal threads created by
BCC.
The number of high priority threads created by
BCC at startup.
The timeout in seconds that BCC waits for an
IPC response.
The maximum number of high priority threads
BCC creates.
The minimum number of high priority threads
BCC keeps after killing idle high priority
threads.
The number of seconds BCC waits for a
resource to go offline during a BCC migrate.
The number of seconds BCC waits for a
resource to go online during a BCC migrate.
The number of seconds BCC sleeps after
performing a scan for new devices during a
BCC migration of a resource.
Default Value
bccgroup
300 seconds
This is supported
in BCC 1.1 and
later.
15 seconds
30 seconds
30 seconds
3
3
2
15
20
2
300
300
5
Need help?
Do you have a question about the BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION and is the answer not in the manual?
Questions and answers