Verifying The Bcc Upgrade - Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION Administration Manual

3 Create the new Identity Manager drivers with the new BCC 1.1 SP2 templates.
4 Start the new Identity Manager drivers for each peer cluster.

5.4.5 Verifying the BCC Upgrade

Verify that Novell Cluster Services and BCC 1.1 SP2 appear to be functioning correctly by
performing the following tests:
1 Create a new BCC enabled pool resource, BCC migrate it between peer clusters, and verify that
it migrates correctly.
2 Make a load script change (for example, add a space character and save the change) to an
existing BCC resource that was created with 1.0, allow the revised load script to synchronize,
then verify that the load script was updated at all eDirectory locations.
3 BCC migrate the pool resource that you modified in
that it migrates correctly and that the Identity Manager drivers are synchronizing.
4 Check all SAN scripts ensure that they will perform the desired functions.
66 BCC 1.1 SP2: Administration Guide for NetWare 6.5 SP8
Step 13b between peer clusters, and verify