Driver Ports; Excluded Users - Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION Administration Manual

2 Using an editor, open the file that is referenced in the message that appears.
You can get additional information on how to use the log file by entering
NetWare server console.

9.2 Driver Ports

If your Identity Manager driver or drivers won't start, check for a port number conflict. Identity
Manager driver port numbers must not be the same as other driver port numbers in the cluster or
ports being used by other services such as Apache.
To check driver port numbers:
1 Start your Internet browser and enter the URL for iManager.
The URL is http://server_ip_address/nps/iManager.html. Replace server_ip_address with the
IP address or DNS name of the server that has iManager and the Identity Manager
preconfigured templates for iManager installed.
2 Specify your username and password, specify the tree where you want to log in, then click
Login.
3 In the left column, click Identity Manager, then click the Identity Manager Overview link.
4 Select Search Entire Tree, then click Search.
5 Select the driver you want to check by clicking the red Cluster Sync icon or the blue User Sync
icon.
6 Click the red or blue icon again, then click the Identity Manager tab (if it is not already
selected).
7 In the Authentication context field, view and if necessary change the port numbers next to the
IP address.
For example, the Authentication context field might contain a value similar to
10.1.1.12:2003:2003. In this example, the first port number (2003) is the port number for the
corresponding Identity Manager driver on the cluster this cluster is synchronizing with. The
second port number (2003) is the port number for the Identity Manager driver on this cluster.
These port numbers should be the same, but should not be the same as the port numbers for
other Identity Manager drivers on either this or the remote cluster.
8 If you change the port numbers, restart the driver by clicking the upper right corner of the
Cluster Sync or User Sync icon (whichever you have chosen), then click Restart driver.
9 If you changed the port number in
corresponding driver in the other cluster.
You can do this by repeating
cluster.

9.3 Excluded Users

If certain users do not synchronize between clusters, it is possible that those users are in the
excluded users list.
NOTE: The eDirectory
TM
Step 7 above, change the port numbers to be the same for the
Step 1 through Step 8
Admin user should never be synchronized between clusters.
help log
for the Identity Manager driver on the other
Troubleshooting Business Continuity Clustering 1.1 103
at the