Table of Contents
Advertisement
5 If the BCC Administrator user is not listed as a trustee, click the Add Trustee button, browse
and select the User object, then click OK.
6 Click Assigned Rights for the BCC Administrator user, then ensure that the Read and Write
check boxes are selected for the All Attributes Rights property.
7 Click Done to save your changes.
8 Repeat
Step 3
through
continuity cluster.
5.4.3 Upgrading Identity Manager
On the Identity Manager node in the cluster, upgrade to Identity Manager 3.5.1.
Before you begin:
Review the BCC 1.1 SP2 configuration requirements in
Bundle Edition," on page
Make sure that the Identity Manager node meets the 3.5.1 upgrade requirements. For
information, see
"Upgrading" (http://www.novell.com/documentation/idm35/install/data/
ampxjxi.html)
in the Identity Manager 3.5.1 Installation Guide.
For information about installing or upgrading Identity Manager, see the
Installation Guide
(http://www.novell.com/documentation/idm35/install/data/front.html).
1 Upgrade Identity Manager to version 3.51.
IMPORTANT: Do not start the drivers yet.
The upgrade updates the Identity Manager software and its plug-ins for iManager 2.7.2 on the
same node.
2 Stop Tomcat 5 by issuing
3 Reset Apache 2 by using the
4 Start Tomcat 5 by using the
5 Wait at least 5 minutes for the iManager changes to take effect, then restart iManager.
6 In iManager, verify that Identity Manager is available.
IMPORTANT: In iManager, the Identity Manager plug-ins are displayed as version 3.6. The
3.6 version functions properly with Identity Manager 3.5.1.
5.4.4 Deleting and Re-Creating the BCC Driver Sets and Drivers
After completing the upgrade procedures for every node in all clusters of the business continuity
cluster, you must delete and re-create the Identity Manager driver sets and drivers with the BCC 1.1
SP2 templates.
On the Identity Manager node in every peer cluster, do the following:
1 Delete the Identity Manager 2.x or 3.0.x drivers and driver sets on the Identity Manager node of
every peer cluster.
2 Create the new BCC driver sets for Identity Manager.
Step 7
for the other Cluster objects in for every cluster in the business
41.
command.
tc5stop
command.
ap2webrs
command.
tomcat
Upgrading Business Continuity Clustering for NetWare
Section 4.1.7, "Identity Manager 3.5.1
Identity Manager 3.51
65
Advertisement
Table of Contents
Need help?
Do you have a question about the BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION and is the answer not in the manual?
Questions and answers