Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION Administration Manual page 59

3 Perform a rolling cluster upgrade for all nodes in a peer cluster:
3a Issue the
cluster leave
3b Update NetWare 6.5 from version SP5 to SP6, and apply the latest patches for NetWare
and Novell Cluster Services.
You can perform a script upgrade by using NWCONFIG.
For information, see
documentation/oes/install-nw/data/b7211uh.html)
See the Business Continuity Clustering 1.1 Readme file (http://www.novell.com/
documentation/bcc/pdfdoc/readme/readme111.pdf)
3c Issue the
cluster join
3d Upgrade Business Continuity Clustering from version 1.0 to 1.1 SP1 by installing BCC
1.1 SP1.
IMPORTANT: Do not start BCC at this time.
The Business Continuity Clustering 1.1 installation program automatically detects if
Business Continuity Clustering 1.0 is installed and performs the necessary updates to
convert 1.0 to 1.1. This includes searching eDirectory for SAN scripts and updating those
scripts to be SMI-S compliant.
For installation instructions for BCC 1.1 SP1, see
Cluster Installation Program" (http://www.novell.com/documentation/bcc/
bcc_administration_nw/data/ht05s5vv.html#h7qplroj)
Clustering 1.1 for NetWare Administration Guide (http://www.novell.com/documentation/
bcc/bcc_administration_nw/data/bktitle.html).
3e If the node is running iManager, update the following iManager plug-ins by uninstalling
the existing NPM files, and then re-installing the correct iManager NPMs, as described in
TID 3009687: You must specify an IP address; iManager plug-ins not working after
update to SP6 (http://www.novell.com/support/php/
search.do?cmd=displayKC&docType=kc&externalId=3009687).
Novell Archive and Version Services (
Novell Cluster Services (
Novell Storage Services
Storage Management (
3f Repeat Step 3a through
4 Repeat the rolling cluster upgrade in
5 On the Identity Manager node in each peer cluster, delete and re-create the Identity Manager
driver sets for the cluster:
5a Delete the Identify manager 2.x driver sets.
5b Create new Identity Manager driver sets and the BCC drivers with the new BCC 1.1 SP1
templates.
IMPORTANT: Do not create a new partition when creating the driver set.
command on one node in the cluster.
"Updating an OES NetWare Server" (http://www.novell.com/
command on the node.
arkmgmt.npm
)
ncsmgmt.npm
( )
TM nssmgmt.npm
)
storagemgmt.npm
Step 3e for each node in the cluster.
Step 3 for each peer cluster.
Upgrading Business Continuity Clustering for NetWare
in the OES NetWare Installation Guide.
for instructions on mandatory patches.
"Running the Business Continuity
in the Novell Business Continuity
)
59