Opening Firewall Ports; Installing And Registering A Framework Agent; Aix Agent Install - Novell PRIVILEGED USER MANAGER 2.2.1 - GETTING STARTED GUIDE 03-31-2010 Getting Started Manual

4.3 Opening Firewall Ports

Port 29120 is used for all communications among the Framework managers and the agents. Port
29120 is also used for communications among the Framework agents.
If firewalls separate your Privileged User Manager machines, this port must be opened to traffic in
both directions for Novell Privileged User Manager to work properly.
The port is specified when the agent is registered with the Framework Manager. If you need to
specify a different port because an application is already using port 29120, this new port needs to be
opened in the firewall for communication.
4.4 Installing and Registering a Framework
Agent
Currently the Framework Agent is available for installation on the platforms listed below. Refer to
Section 2.3, "Supported Platforms," on page 13
For detailed installation instructions for your platform, select from the list below:
Section 4.4.1, "AIX Agent Install," on page 28
Section 4.4.2, "HP-UX Agent Install," on page 29
Section 4.4.3, "Linux Agent Install," on page 30
Section 4.4.4, "Solaris Agent Install," on page 31
Section 4.4.5, "Tru64 Agent Install," on page 32
NOTE: Agents must be registered with the Framework Manager after installation.

4.4.1 AIX Agent Install

The AIX installation package is compressed through gzip. In order to install the package, you must
unzip the package through gunzip.
By default, the installation program installs the software into
directory in the required part of the file system and create a symbolic link to
To install the AIX agent:
1 Copy the installation package to a temporary location and use the following command to
extract the installation files:
gunzip <filename>
See the
privilegedusermanager22/readme/privilegedusermanager_readme.html)
filename.
2 After the AIX installation package is uncompressed, use one of the following methods to
perform the installation.
The AIX smitty program
The following command:
installp -acgNQqwX -d <directory of .bff file> novellnpum
28 Novell Privileged User Manager 2.2.1 Getting Started Guide
"Novell Privileged User Manager Readme" (http://www.novell.com/documentation/
for more information regarding supported versions.
/opt/novell
. To change this, create a
.
/opt/novell
for the actual