Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION Administration Manual page 61

2 Delete the Identity Manager 2.x drivers and driver sets on the Identity Manager node of every
peer cluster.
3 Perform a rolling cluster upgrade from NetWare 6.5 SP6 to SP8 for all nodes in a peer cluster:
3a Issue the
cluster leave
3b Upgrade NetWare 6.5 from version SP6 to SP8, and apply the latest patches for NetWare
and Novell Cluster Services.
You can perform a script upgrade by using NWCONFIG.
For information, see
documentation/oes2/inst_oes_nw/data/b7211uh.html)
Installation Guide.
3c If the node is running iManager, update the storage related plug-ins for iManager.
After upgrading to NetWare 6.5 SP8, iManager no longer displays the roles for Clusters,
Storage, and DirXML. The storage related plug-ins require special handling because some
storage features were reorganized in the NetWare 6.5 SP8 release. For information, see
"Storage Related Plug-Ins Must Be Uninstalled" (http://www.novell.com/documentation/
oes2/oes_readme/data/bi59826.html#biv1r9v)
www.novell.com/documentation/oes2/oes_readme/data/readme.html).
NOTE: The DirXML plug-ins will be replaced by Identity Manager 3.5.1 plug-ins in
Step 5 on page 62.
3c1 In iManager, uninstall the old iManager plug-ins for Novell Cluster Services
(ncsmgmt.npm
(
arkmgmt.npm
3c2 In iManager, install the new set of storage-related plug-ins for iManager 2.7.2 from
the NetWare 6.5 SP8 installation media:
Novell AFP (
Novell Archive and Version Services (
Novell CIFS (
Novell Cluster Services
Novell Distributed File Services (
Novell Storage Services (
Storage Management, (
3c3 Stop Tomcat 5 by issuing
3c4 Reset Apache 2 by using the
3c5 Start Tomcat 5 by using the
3c6 Wait at least 5 minutes for the iManager changes to take effect, then restart iManager.
3c7 In iManager, verify that BCC tasks are available in the Clusters role.
3d Repeat Step 3a through
4 On each node in the cluster, upgrade Business Continuity Clustering from version 1.1 SP1 to
1.1 SP2 by installing BCC 1.1 SP2.
IMPORTANT: Do not start BCC at this time.
For instructions, see Chapter 4, "Installing Business Continuity Clustering," on page
command on one node in the cluster.
"3.0 Upgrading to OES 2 SP1 NetWare" (http://www.novell.com/
), NSS ( ), Archive and Version Services
nssmgmt.npm
), and Storage Management, (
)
afpmgmt.npm
)
cifsmgmt.npm
(ncsmgmt.npm
dfsmgmt.npm
nssmgmt.npm
storagemgmt.npm
command.
tc5stop
ap2webrs
command.
tomcat
Step 3c7 for each node in the cluster.
Upgrading Business Continuity Clustering for NetWare
in the OES 2 SP1: NetWare
in the OES 2 SP1 Readme (http://
storagemgmt.npm
)
arkmgmt.npm
)
)
)
)
command.
).
37.
61