Authorizing The Bcc Administrator User - Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION Administration Manual

NOTE: The DirXML plug-ins will be replaced by Identity Manager 3.5.1 plug-ins in
Section 5.4.3, "Upgrading Identity Manager," on page
4a In iManager, uninstall the old iManager plug-ins for Novell Cluster Services
(ncsmgmt.npm
and Storage Management, (
4b In iManager, install the new set of storage-related plug-ins for iManager 2.7.2 from the
NetWare 6.5 SP8 installation media:
Novell AFP (
Novell Archive and Version Services (
Novell CIFS (
Novell Cluster Services
Novell Distributed File Services (
Novell Storage Services (
Storage Management, (
4c Stop Tomcat 5 by issuing
4d Reset Apache 2 by using the
4e Start Tomcat 5 by using the
4f Wait at least 5 minutes for the iManager changes to take effect, then restart iManager.
4g In iManager, verify that BCC tasks are available in the Clusters role.
5 Repeat
6 Issue the
7 On each node in the cluster, upgrade Business Continuity Clustering from version 1.1 SP1 to
1.1 SP2 by installing BCC 1.1 SP2.
IMPORTANT: Do not start BCC at this time.
For instructions, see
8 Issue the
9 Repeat

5.4.2 Authorizing the BCC Administrator User

The BCC Administrator user must be a trustee of the Cluster objects in your BCC, and have at least
read and write rights to the all attributes rights property.
1 Start your Internet browser and enter the URL for iManager.
The URL is http://server_ip_address/nps/iManager.html. Replace server_ip_address with the
IP address or DNS name of the server that has iManager and the Identity Manager
preconfigured templates for iManager installed.
2 Specify your username and password, specify the tree where you want to log in, then click
Login.
3 In the left column, click Rights, then click the Modify Trustees link.
4 Specify the Cluster object name, or browse and select it, then click OK.
64 BCC 1.1 SP2: Administration Guide for NetWare 6.5 SP8
), NSS (
nssmgmt.npm
afpmgmt.npm
cifsmgmt.npm
(ncsmgmt.npm
nssmgmt.npm
storagemgmt.npm
tc5stop
Step 2 through Step 4g for each node in the cluster.
command on each node in the cluster.
cluster join
Chapter 4, "Installing Business Continuity Clustering," on page
command on each node to have them join the BCC.
ldbcc.ncf
Step 2 through Step 8 for each peer cluster in your business continuity cluster.
65.
), Archive and Version Services (
).
storagemgmt.npm
)
arkmgmt.npm
)
)
)
dfsmgmt.npm
)
)
command.
command.
ap2webrs
command.
tomcat
arkmgmt.npm
)
),
37.