Cisco 3750 - Catalyst EMI Switch Message Manual page 66

PLATFORM_RPC Messages
Error Message PLATFORM_RPC-3-BAD_CLASS: Bad Class in RPC message: [int].
Explanation
[int] is the number of the missing message class.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message PLATFORM_RPC-3-MSG_THROTTLED: RPC Msg Dropped by throttle mechanism:
type [int], class [int], max_msg [int], total throttled [int].
Explanation
class. An RSP message was dropped. The first [int] is the message type, the second [int] is the
message class, the third [int] is the maximum number of messages that can be queued before
throttling occurs, and the last [int] is the total number of messages that have been throttled.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message PLATFORM_RPC-3-PERSISTENT_UNABLE_TO_SEND: System is consistently
unable to send RPC message: [chars], paks_outstanding: [int].
Explanation
failure in sending RPC messages. [chars] is a description of the error returned by the low-level
packet-sending driver that triggered the error (usually one of these: fifo full, fifo empty, out of buf,
out of mem, null pointer, misc failure), and [int] is the number of packets outstanding (packets from
the RPC code to the driver that have not yet been sent).
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Catalyst 3750 Switch System Message Guide
2-48
This message means that there is a missing entry in the class table for a message class.
Copy the message exactly as it appears on the console or in the system log.
This message means that there are too many outgoing messages queued for a message
Copy the message exactly as it appears on the console or in the system log.
This message means that the system is experiencing a persistent low-level transport
Copy the message exactly as it appears on the console or in the system log.
Chapter 2 Message and Recovery Procedures
1-5.
1-5.
1-5.
"Error
"Error
"Error
78-16184-04