Cisco 3750 - Catalyst EMI Switch Message Manual page 76

PM Messages
Error Message PM-4-ERR_RECOVER: Attempting to recover from [chars] err-disable state
on [chars].
Explanation
taking it down to the error-disabled state. The first [chars] is the error, and the second [chars] is the
affected interface.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Error Message PM-4-EXT_VLAN_INUSE: VLAN [dec] currently in use by [chars].
Explanation
because the VLAN is being used by another feature. [dec] is the VLAN that is being used, and
[chars] is the feature that is using it.
Recommended Action
VLAN or to request another available VLAN.
Error Message PM-4-EXT_VLAN_NOTAVAIL: VLAN [dec] not available in Port Manager.
Explanation
VLAN is probably being used as an internal VLAN by other features. [dec] is the requested VLAN.
Recommended Action
Error Message PM-4-INACTIVE: putting [chars] in inactive state because [chars].
Explanation
for the switch port and VLAN, causing the port to be in an inactive state. The reason for this
condition is specified in the error message. The first [chars] is the interface name, and the second
[chars] is the reason.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Catalyst 3750 Switch System Message Guide
2-58
This message means that the port manager is attempting to bring the interface up after
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
This message means that the port manager failed to allocate the VLAN for external use
Reconfigure the feature (for example, the routed port) to use another internal
This message means that the port manager failed to allocate the requested VLAN. The
Try to configure a different VLAN on the device.
This message means that the port manager has been blocked from creating a virtual port
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
Chapter 2 Message and Recovery Procedures
1-5.
1-5.
78-16184-04