Stackmgr Messages - Cisco 3750 - Catalyst EMI Switch Message Manual

STACKMGR Messages

STACKMGR Messages
This section contains stack manager system messages. These messages are related to the status of
switches within the stack.
Error Message STACKMGR-6-HDM_GET_DEVICE_RECORD_FAIL: Device Manager could not get
device record.
Error Message STACKMGR-6-MASTER_ELECTED: Switch [dec] has been elected as MASTER of
the stack.
Error Message STACKMGR-6-MASTER_READY: Master Switch [dec] is READY.
Error Message STACKMGR-6-MSG_FAIL: Failed to retrieve stack message from port-asic
[dec] in direction [dec].
Error Message STACKMGR-6-NORECORD: Switch removed event for switch [dec] with no
switch record.
Catalyst 3750 Switch System Message Guide
2-76
Explanation This message means that this switch could not get the device record for some or all other
switches in the stack.
Find out more about the error by using the show tech-support privileged EXEC
Recommended Action
command and by copying the error message exactly as it appears on the console or system log and
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For
more information about these online tools and about contacting Cisco, see the
Traceback Reports" section on page
Explanation This message means that the specified switch has been elected stack master. [dec] is the
switch number of the elected stack master.
No action is required.
Recommended Action
Explanation This message means that the stack master is ready for use. [dec] is the stack master
switch number.
No action is required.
Recommended Action
This message means that stack manager module failed to retrieve stack messages. The
Explanation
first [dec] is the ASIC ID, and the second [dec] is the direction.
Recommended Action No action is required.
Explanation This message means that the stack manager received a switch-removed event for which
there is no switch record. [dec] is the switch number.
Recommended Action No action is required.
Chapter 2
1-5.
Message and Recovery Procedures
"Error Message
78-16184-04