Switch_Qos_Tb Messages; Tcammgr Messages - Cisco 3750 - Catalyst EMI Switch Message Manual

Chapter 2 Message and Recovery Procedures
Error Message SW_VLAN-6-VTP_MODE_CHANGE: VLAN manager changing device mode from
[chars] to [chars].

SWITCH_QOS_TB Messages

This section contains the QoS trusted boundary (TB) messages.
Error Message SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: [chars] detected on port
[chars], port trust enabled.
Error Message SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: [chars] no longer detected on port
[chars], port set to untrusted.

TCAMMGR Messages

This section contains the ternary content-addressable memory manager (TCAMMGR) messages.
Error Message TCAMMGR-3-GROW_ERROR: cam region [dec] can not grow.
78-16184-04
Explanation This message means that an automatic VTP mode device change occurred upon receipt
of a VLAN configuration database message containing more than a set number of VLANs. The first
[chars] is the previous mode, and the second [chars] is the current mode.
Recommended Action No action is required.
This message means that the trusted boundary software detected a device matching the
Explanation
trusted device setting for the port and has modified the port trust state. The first [chars] is the type
of device detected, and the second [chars] is the port ID.
No action is required.
Recommended Action
Explanation This message means that the trusted boundary software lost contact with a trusted
device and has set the port trust state to untrusted. The first [chars] is the type of device detected,
and the second [chars] is the port ID.
Recommended Action No action is required.
This message means that the specified CAM region is configured as a static region with
Explanation
a fixed number of entries, and a caller requested to add more CAM entries. [dec] is the CAM region.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page 1-5.
Catalyst 3750 Switch System Message Guide
SWITCH_QOS_TB Messages
"Error
2-89