Cisco 3750 - Catalyst EMI Switch Message Manual page 38

EC Messages
Error Message EC-5-CANNOT_BUNDLE2: [chars] is not compatible with [chars] and will
be suspended ([chars]).
Explanation
in the EtherChannel. For the interface to join the bundle (EtherChannel), change the interface
attributes to match the EtherChannel attributes. The first [chars] is the interface to be bundled, the
second [chars] is the physical interface (a switch port or a routed port) that is already in the bundle,
and the third [chars] is the reason for the incompatibility.
Recommended Action
Error Message EC-5-CANNOT_BUNDLE_LACP: [chars] is not compatible with aggregators in
channel [dec] and cannot attach to them ([chars]).
Explanation
ports within the port channel. For the port to join the bundle, change the port attributes so that they
match the port. [chars] is the incompatible port. [chars] is the short interface name, such as Gi1/0/1,
[dec] is the channel group number, and the last [chars] is the reason.
Recommended Action
Error Message EC-5-COMPATIBLE: [chars] is compatible with port-channel members.
Explanation
from those of the port channel or ports within the port channel. The system has detected that the
attributes of the port now match the port-channel attributes. [chars] is the affected port.
Recommended Action
Error Message EC-5-DONTBNDL: [chars] suspended: incompatible partner port with
[chars].
Explanation
bundle. A port can only join the bundle when its global configuration and the configuration of the
partner port are the same as other ports in the bundle. The first [chars] is the local interface that is
being suspended, and the second [chars] is the local interface that is already bundled.
Recommended Action
bundle.
Error Message EC-5-ERRPROT: Channel protocol mismatch for interface [chars] in group
[dec]: the interface can not be added to the channel group.
Explanation
specified mode. [chars] is the interface, and [dec] is the channel group.
Recommended Action
Catalyst 3750 Switch System Message Guide
2-20
This message means that the interface has different interface attributes than other ports
Change the interface attributes to match the EtherChannel attributes.
This message means that the port has different port attributes than the port channel or
Match the port attributes to the port channel.
This message means that a port was not operational because its attributes were different
No action is required.
The configuration of the partner port differs from the configuration of other ports in the
Verify that the configuration of the partner ports is the same for all ports in the
This message means that the interface cannot be added to the channel group with the
Change the channel group or the mode for the interface.
Chapter 2 Message and Recovery Procedures
78-16184-04