Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 149

Database Link Attributes under cn=config, cn=chaining database, cn=plugins, cn=config
is suspected. Once this delay period has been met, the database link tests the connection with the
remote server.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
3.5.1.3. nsMaxTestResponseDelay
This error detection, performance-related attribute specifies the duration of the test issued by the
database link to check whether the remote server is responding. If a response from the remote server
is not returned before this period has passed, the database link assumes the remote server is down,
and the connection is not used for subsequent operations.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
3.5.1.4. nsTransmittedControls
This attribute, which can be both a global (and thus dynamic) configuration or an instance (that is,
cn=database link instance, cn=chaining database, cn=plugins, cn=config)
configuration attribute, allows the controls the database link forwards to be altered. The following
controls are forwarded by default by the database link:
• Managed DSA (OID: 2.16.840.1.113730.3.4.2)
• Virtual list view (VLV) (OID: 2.16.840.1.113730.3.4.9)
• Server side sorting (OID: 1.2.840.113556.1.4.473)
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
Description
cn=config, cn=chaining database, cn=plugins,
cn=config
Any valid delay period in seconds
60 seconds
Integer
nsMaxResponseDelay: 60
Description
cn=config, cn=chaining database, cn=plugins,
cn=config
Any valid delay period in seconds
15 seconds
Integer
nsMaxTestResponseDelay: 15
Description
cn=config, cn=chaining database, cn=plugins,
cn=config
Any valid OID or the above listed controls
forwarded by the database link
None
Integer
nsTransmittedControls: 1.2.840.113556.1.4.473
139