Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 40

Chapter 2. Core Server Configuration Reference
Parameter
Default Value
Syntax
Example
2.3.1.43. nsslapd-errorlog-list
This read-only attribute provides a list of error log files.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.44. nsslapd-errorlog-logexpirationtime (Error Log Expiration Time)
This attribute sets the maximum age that a log file is allowed to reach before it is deleted. This
attribute supplies only the number of units. The units (day, week, month, and so forth) are given by the
nsslapd-errorlog-logexpirationtimeunit attribute.
30
Description
• 2048 — Log entry parsing debugging.
• 4096 — Housekeeping thread debugging.
• 8192 — Replication debugging.
• 16384 — Default level of logging used for
critical errors and other messages that are
always written to the error log; for example,
server startup messages. Messages at this
level are always included in the error log,
regardless of the log level setting.
• 32768 — Database cache debugging.
• 65536 — Server plug-in debugging. It writes
an entry to the log file when a server plug-in
calls slapi-log-error.
• 131072 — Microsecond resolution for
timestamps instead of the default seconds.
• 262144 — Access control summary
information, much less verbose than level
128. This value is recommended for use when
a summary of access control processing is
needed. Use 128 for very detailed processing
messages.
16384
Integer
nsslapd-errorlog-level: 8192
Description
cn=config
None
DirectoryString
nsslapd-errorlog-list: errorlog2,errorlog3