Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 26

Chapter 2. Core Server Configuration Reference
2.3.1.10. nsslapd-accesslog-logrotationsync-enabled (Access Log
Rotation Sync Enabled)
This attribute sets whether access log rotation is to be synchronized with a particular time of the day.
Synchronizing log rotation this way can generate log files at a specified time during a day, such as
midnight to midnight every day. This makes analysis of the log files much easier because they then
map directly to the calendar.
For access log rotation to be synchronized with time-of-day, this attribute must be enabled
with the nsslapd-accesslog-logrotationsynchour and nsslapd-accesslog-
logrotationsyncmin attribute values set to the hour and minute of the day for rotating log files.
For example, to rotate access log files every day at midnight, enable this attribute by setting its
value to on, and then set the values of the nsslapd-accesslog-logrotationsynchour and
nsslapd-accesslog-logrotationsyncmin attributes to 0.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.11. nsslapd-accesslog-logrotationsynchour (Access Log Rotation
Sync Hour)
This attribute sets the hour of the day for rotating access logs. This attribute must be used in
conjunction with nsslapd-accesslog-logrotationsync-enabled and nsslapd-accesslog-
logrotationsyncmin attributes.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
2.3.1.12. nsslapd-accesslog-logrotationsyncmin (Access Log Rotation
Sync Minute)
This attribute sets the minute of the day for rotating access logs. This attribute must be used in
conjunction with nsslapd-accesslog-logrotationsync-enabled and nsslapd-accesslog-
logrotationsynchour attributes.
Parameter
Entry DN
Valid Range
16
Description
cn=config
on | off
off
DirectoryString
nsslapd-accesslog-logrotationsync-enabled: on
Description
cn=config
0 through 23
0
Integer
nsslapd-accesslog-logrotationsynchour: 23
Description
cn=config
0 through 59