Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 82

Chapter 2. Core Server Configuration Reference
Parameter
Default Value
Syntax
Example
2.3.7.9. nsDS5ReplicaRoot
This attribute sets the DN at the root of a replicated area. This attribute must have the same value as
the suffix of the database being replicated and cannot be modified.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.7.10. nsDS5ReplicaTombstonePurgeInterval
This attribute specifies the time interval in seconds between purge operation cycles.
Periodically, the server runs an internal housekeeping operation to purge old update
and state information from the changelog and the main database. See
"nsDS5ReplicaPurgeDelay".
When setting this attribute, remember that the purge operation is time-consuming, especially if the
server handles many delete operations from clients and suppliers.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
2.3.7.11. nsDS5ReplicaType
Defines the type of replication relationship that exists between this replica and the others.
Parameter
Entry DN
72
Description
DirectoryString
nsDS5ReplicaReferral: ldap://ldap.example.com
Description
cn=replica, cn=suffixDN, cn=mapping tree,
cn=config
Suffix of the database being replicated, which is
the suffix DN
DirectoryString
nsDS5ReplicaRoot: "dc=example,dc=com"
Section 2.3.7.7,
Description
cn=replica, cn=suffixDN, cn=mapping tree,
cn=config
0 to maximum 32-bit integer (2147483647) in
seconds
86400 (1 day)
Integer
nsDS5ReplicaTombstonePurgeInterval: 86400
Description
cn=replica, cn=suffixDN, cn=mapping tree,
cn=config