Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 23

Parameter
Default Value
Syntax
Example
2.3.1.3. nsslapd-accesslog-list
This read-only attribute, which cannot be set, provides a list of access log files used in access log
rotation.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.4. nsslapd-accesslog-logbuffering (Log Buffering)
When set to off, the server writes all access log entries directly to disk. Buffering allows the server
to use access logging even when under a heavy load without impacting performance. However, when
debugging, it is sometimes useful to disable buffering in order to see the operations and their results
right away instead of having to wait for the log entries to be flushed to the file. Disabling log buffering
can severely impact performance in heavily loaded servers.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.5. nsslapd-accesslog-logexpirationtime (Access Log Expiration
Time)
This attribute specifies the maximum age that a log file is allowed to reach before it is deleted. This
attribute supplies only the number of units. The units are provided by the nsslapd-accesslog-
logexpirationtimeunit attribute.
Parameter
Entry DN
Valid Range
Description
access operation, entry access, and referral
logging.
256
Integer
nsslapd-accesslog-level: 256
Description
cn=config
None
DirectoryString
nsslapd-accesslog-list: accesslog2,accesslog3
Description
cn=config
on | off
on
DirectoryString
nsslapd-accesslog-logbuffering: off
Description
cn=config
-1 to the maximum 32 bit integer value
(2147483647)
cn=config
13