Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 41

Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
2.3.1.45. nsslapd-errorlog-logexpirationtimeunit (Error Log Expiration
Time Unit)
This attribute sets the units for the nsslapd-errorlog-logexpirationtime attribute. If the unit is
unknown by the server, then the log never expires.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.46. nsslapd-errorlog-logging-enabled (Enable Error Logging)
Turns error logging on and off.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.47. nsslapd-errorlog-logmaxdiskspace (Error Log Maximum Disk
Space)
This attribute sets the maximum amount of disk space in megabytes that the error logs are allowed to
consume. If this value is exceeded, the oldest error log is deleted.
When setting a maximum disk space, consider the total number of log files that can be created due
to log file rotation. Also, remember that there are three different log files (access log, audit log, and
error log) maintained by the Directory Server, each of which consumes disk space. Compare these
considerations to the total amount of disk space for the error log.
Description
cn=config
-1 to the maximum 32 bit integer value
(2147483647)
A value of -1 or 0 means that the log never
expires.
-1
Integer
nsslapd-errorlog-logexpirationtime: 1
Description
cn=config
month | week | day
month
DirectoryString
nsslapd-errorlog-logexpirationtimeunit: week
Description
cn=config
on | off
on
DirectoryString
nsslapd-errorlog-logging-enabled: on
cn=config
31