Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 90

Chapter 2. Core Server Configuration Reference
Parameter
Example
2.3.8.18. nsDS5ReplicaRoot
This attribute sets the DN at the root of a replicated area. This attribute must have the same value as
the suffix of the database being replicated and cannot be modified.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.8.19. nsDS5ReplicaSessionPauseTime
This attribute sets the amount of time in seconds a supplier should wait between update sessions.
The default value is 0. If the attribute is set to a negative value, Directory Server sends the client a
message and an LDAP_UNWILLING_TO_PERFORM error code.
The nsDS5ReplicaSessionPauseTime attribute works in conjunction with the
nsDS5ReplicaBusyWaitTime attribute. The two attributes are designed so that the
nsDS5ReplicaSessionPauseTime interval is always at least one second longer than the interval
specified for nsDS5ReplicaBusyWaitTime. The longer interval gives waiting suppliers a better
chance to gain consumer access before the previous supplier can re-access the consumer.
• If either attribute is specified but not both, nsDS5ReplicaSessionPauseTime is set automatically
to 1 second more than nsDS5ReplicaBusyWaitTime.
• If both attributes are specified, but nsDS5ReplicaSessionPauseTime is less than or equal to
nsDS5ReplicaBusyWaitTime, nsDS5ReplicaSessionPauseTime is set automatically to 1
second more than nsDS5ReplicaBusyWaitTime.
When setting the values, ensure that the nsDS5ReplicaSessionPauseTime interval is at least 1
second longer than the interval specified for nsDS5ReplicaBusyWaitTime. Increase the interval as
needed until there is an acceptable distribution of consumer access among the suppliers.
Set the nsDS5ReplicaSessionPauseTime attribute at any time by using changetype:modify
with the replace operation. The change takes effect for the next update session if one is already in
progress.
If Directory Server has to reset the value of nsDS5ReplicaSessionPauseTime automatically,
the value is changed internally only. The change is not visible to clients, and it is not saved to the
configuration file. From an external viewpoint, the attribute value appears as originally set.
Parameter
Entry DN
80
Description
nsDS5BeginReplicaRefresh: start
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Suffix of the database being replicated - same as
suffixDN above
DirectoryString
nsDS5ReplicaRoot: "dc=example,dc=com"
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config