Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 74

Chapter 2. Core Server Configuration Reference
Parameter
Valid Values
Default Value
Syntax
Example
2.3.2.2. nsslapd-changelogmaxage (Max Changelog Age)
This attribute sets the maximum age of any entry in the changelog. The changelog contains a
record for each directory modification and is used when synchronizing consumer servers. Each
record contains a timestamp. Any record with a timestamp that is older than the value specified in
this attribute is removed. If this attribute is absent, there is no age limit on changelog records. For
information on the changelog, see
The server has to be restarted for changes to this attribute to go into effect.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
2.3.2.3. nsslapd-changelogmaxentries (Max Changelog Records)
This attribute sets the maximum number of records the changelog may contain. If this attribute is
absent, there is no maximum number of records the changelog can contain. For information on the
Section 2.3.2.1,
changelog, see
The server has to be restarted for changes to this attribute to go into effect.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
64
Description
Any valid path to the directory storing the
changelog
None
DirectoryString
nsslapd-changelogdir: /var/lib/dirsrv/
slapd-instance_name/changelogdb
Section 2.3.2.1, "nsslapd-changelogdir".
Description
cn=changelog5,cn=config
0 (meaning that entries are not removed
according to their age) to maximum 32-bit integer
(2147483647)
0
DirectoryString IntegerAgeID where AgeID is
s for seconds, m for minutes, h for hours, d for
days, and w for weeks
nsslapd-changelogmaxage: 30d
"nsslapd-changelogdir".
Description
cn=changelog5,cn=config
0 (meaning that the only maximum limit is
the disk size) to maximum 32-bit integer
(2147483647)
0
Integer
nsslapd-changelogmaxentries: 5000