Password Policy - Red Hat DIRECTORY SERVER 8.0 Command Reference Manual

Chapter 2. Core Server Configuration Reference
The server has to be restarted for the port number change to be taken into account.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
NOTE
Set the port number to zero (0) to disable the LDAP port if the LDAPS port is enabled.
2.3.1.73. nsslapd-privatenamespaces
This read-only attribute contains the list of the private naming contexts cn=config, cn=schema, and
cn=monitor.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.74. nsslapd-pwpolicy-local (Enable Subtree- and User-Level

Password Policy)

Turns fine-grained (subtree- and user-level) password policy on and off.
If this attribute has a value of off, all entries (except for cn=Directory Manager) in the directory is
subjected to the global ord policy; the server ignores any defined subtree/user level password policy.
If this attribute has a value of on, the server checks for password policies at the subtree- and user-
level and enforce those policies.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
42
Description
cn=config
1 to 65535
389
Integer
nsslapd-port: 389
Description
cn=config
cn=config, cn=schema, and cn=monitor
DirectoryString
nsslapd-privatenamespaces: cn=config
Description
cn=config
on | off
off
DirectoryString
nsslapd-pwpolicy-local: off