Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 86

Chapter 2. Core Server Configuration Reference
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
2.3.8.7. nsDS5ReplicaCredentials
This attribute sets the credentials for the bind DN (specified in the nsDS5ReplicaBindDN attribute)
on the remote server containing the consumer replica. The value for this attribute can be modified.
When certificate-based authentication is used, this attribute may not have a value. The example
shows the dse.ldif entry, not the actual password. If this value over LDAP or using the Console, set
it to the cleartext credentials, and let the server encrypt the value.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.8.8. nsDS5ReplicaHost
This attribute sets the hostname for the remote server containing the consumer replica. Once this
attribute has been set, it cannot be modified.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.8.9. nsDS5ReplicaLastInitEnd
This optional, read-only attribute states when the initialization of the consumer replica ended.
76
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
0 to maximum 32-bit integer (2147483647)
Integer
nsDS5ReplicaChangesSentSinceStartup: 647
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Any valid password, which is then encrypted
using the DES reversible password encryption
schema.
DirectoryString {DES} encrypted_password
nsDS5ReplicaCredentials:{DES}
9Eko69APCJfF08A0aD0C
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Any valid host server name
DirectoryString
nsDS5ReplicaHost: ldap2.example.com