Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 207

Option
-ZZ
-ZZZ
Table 6.19. General ldappasswd Options
SASL Options
SASL mechanisms can be used to authenticate a user, using the -o the required SASL information.
To learn which SASL mechanisms are supported, search the root DSE. See the -b option in
"Commonly-Used ldapsearch
Option
-o
Table 6.20. SASL Options
SASL Options
See for information on how to use SASL options with ldappasswd.
Examples
The following examples provide show how to perform various tasks using the ldappasswd command.
Description
Specifies the Start TLS request. Use this option
to make a cleartext connection into a secure
one. If the server does not support Start TLS,
the command does not need to be aborted; it will
continue in cleartext.
Enforces the Start TLS request. The server
must respond that the request was successful.
If the server does not support Start TLS, such
as Start TLS is not enabled or the certificate
information is incorrect, the command is aborted
immediately.
Options".
Description
Specifies SASL options. The format is -o
saslOption=value. saslOption can have one of
six values:
• mech
• authid
• authzid
• secProp
• realm
• flags
The expected values depend on the supported
mechanism. The -o can be used multiple times
to pass all of the required SASL information for
the mechanism. For example:
-o "mech=DIGEST-MD5" -o "authzid=test_user" -
o "authid=test_user"
ldappasswd
Table 6.3,
197