Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 89

Replication Attributes under cn=ReplicationAgreementName, cn=replica, cn="suffixName", cn=mapping tree, cn=config
Parameter
Example
2.3.8.15. nsDS5ReplicaPort
This attribute sets the port number for the remote server containing the replica. Once this attribute has
been set, it cannot be modified.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.8.16. nsDS5ReplicaReapActive
This read-only attribute specifies whether the background task that removes old tombstones (deleted
entries) from the database is active. See
more information about this task. A value of zero (0) means that the task is inactive, and a value of 1
means that the task is active. If this value is set manually, the server ignores the modify request.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.8.17. nsDS5BeginReplicaRefresh
Initializes the replica. This attribute is absent by default. However, if this attribute is added with a
value of start, then the server initializes the replica and removes the attribute value. To monitor the
status of the initialization procedure, poll for this attribute. When initialization is finished, the attribute is
removed from the entry, and the other monitoring attributes can be used for detailed status inquiries.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Description
nsDS5ReplicaLastUpdateStatus: 0 replica
acquired successfully
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Port number for the remote server containing the
replica
Integer
nsDS5ReplicaPort:389
Section 2.3.7.10, "nsDS5ReplicaTombstonePurgeInterval"
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
0 | 1
Integer
nsDS5ReplicaReapActive: 0
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
stop | start
DirectoryString
for
79