Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 37

Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.37. nsslapd-conntablesize
This attribute sets the connection table size, which determines the total number of connections
supported by the server.
The server has to be restarted for changes to this attribute to go into effect.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
Increase the value of this attribute if Directory Server is refusing connections because it is out of
connection slots. When this occurs, the Directory Server's error log file records the message Not
listening for new connections -- too many fds open.
A server restart is required for the change to take effect.
It may be necessary to increase the operating system limits for the number of open files and number
of open files per process, and it may be necessary to increase the ulimit for the number of open
files (ulimit -n) in the shell that starts the Directory Server. See
maxdescriptors (Maximum File Descriptors)"
2.3.1.38. nsslapd-csnlogging
This attribute sets whether change sequence numbers (CSNs), when available, are to be logged in the
access log. By default, CSN logging is turned on.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
Description
cn=config
Any valid configuration DN
DirectoryString
nsslapd-config: cn=config
Description
cn=config
Operating-system dependent
The default value is the system's max
descriptors, which can be configured using
Section 2.3.1.67, "nsslapd-maxdescriptors
the
(Maximum File Descriptors)"
Integer
nsslapd-conntablesize: 4093
Section 2.3.1.67, "nsslapd-
for more information.
Description
cn=config
on | off
on
DirectoryString
nsslapd-csnlogging: on
cn=config
attribute.
27