Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 31

Parameter
Example
2.3.1.22. nsslapd-auditlog-logexpirationtimeunit (Audit Log Expiration
Time Unit)
This attribute sets the units for the nsslapd-auditlog-logexpirationtime attribute. If the unit is
unknown by the server, then the log never expires.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.23. nsslapd-auditlog-logging-enabled (Audit Log Enable Logging)
Turns audit logging on and off.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
For audit logging to be enabled, this attribute must have a valid path and parameter and the
nsslapd-auditlog-logging-enabled configuration attribute must be switched to on. The table
lists the four possible combinations of values for these two configuration attributes and their outcome
in terms of disabling or enabling of audit logging.
Attribute
nsslapd-auditlog-logging-
enabled
nsslapd-auditlog
nsslapd-auditlog-logging-
enabled
nsslapd-auditlog
nsslapd-auditlog-logging-
enabled
nsslapd-auditlog
nsslapd-auditlog-logging-
enabled
Description
nsslapd-auditlog-logexpirationtime: 1
Description
cn=config
month | week | day
week
DirectoryString
nsslapd-auditlog-logexpirationtimeunit: day
Description
cn=config
on | off
off
DirectoryString
nsslapd-auditlog-logging-enabled: off
Value
on
empty string
on
filename
off
empty string
off
Logging enabled or disabled
Disabled
Enabled
Disabled
Disabled
cn=config
21