Red Hat DIRECTORY SERVER 8.0 Command Reference Manual page 24

Chapter 2. Core Server Configuration Reference
Parameter
Default Value
Syntax
Example
2.3.1.6. nsslapd-accesslog-logexpirationtimeunit (Access Log Expiration
Time Unit)
This attribute specifies the units for nsslapd-accesslog-logexpirationtime attribute. If the unit
is unknown by the server, then the log never expires.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.7. nsslapd-accesslog-logging-enabled (Access Log Enable
Logging)
Disables and enables accesslog logging but only in conjunction with the nsslapd-accesslog
attribute that specifies the path and parameter of the log used to record each database access.
For access logging to be enabled, this attribute must be switched to on, and the nsslapd-
accesslog configuration attribute must have a valid path and parameter. The table lists the four
possible combinations of values for these two configuration attributes and their outcome in terms of
disabling or enabling of access logging.
Attribute
nsslapd-accesslog-logging-
enabled
nsslapd-accesslog
nsslapd-accesslog-logging-
enabled
nsslapd-accesslog
nsslapd-accesslog-logging-
enabled
nsslapd-accesslog
nsslapd-accesslog-logging-
enabled
14
Description
A value of -1 or 0 means that the log never
expires.
-1
Integer
nsslapd-accesslog-logexpirationtime: 2
Description
cn=config
month | week | day
month
DirectoryString
nsslapd-accesslog-logexpirationtimeunit: week
Value
on
empty string
on
filename
off
empty string
off
filename
Logging Enabled or Disabled
Disabled
Enabled
Disabled
Disabled