AMX COLOR TOUCH PANELS WITH AUDIO (G3 FIRMWARE) Instruction Manual page 54

Programming
System Send_Commands (Cont.)
RESET
Clears panel sta-
tus (same as
power up).
Saved data is not
cleared.
SETUP
Goes to the Setup
page.
SLEEP
Forces the touch
panel to screen
saver mode.
SVOL
Sets the
speaker
volume to a
specified level or
percentage.
TPAGEOFF
Deactivates page
tracking.
50
Syntax:
"'RESET'"
Example:
SEND_COMMAND TP,"'RESET'"
Resets the touch panel.
Syntax:
"'SETUP'"
Example:
SEND_COMMAND TP,"'SETUP'"
Flips the touch panel to the Setup page.
Syntax:
"'SLEEP'"
Example:
SEND_COMMAND TP,"'SLEEP'"
Activates the screen saver mode.
Syntax:
"'SVOL,<volume level>,<percentage 1>'"
Variable:
volume level = 0 - 255
percentage 1 = set the percentage to equal the level value
Example1:
SEND_COMMAND TP,"'SVOL,255'"
Sets the speaker to the maximum level.
Example2:
SEND_COMMAND TP,"'SVOL,0'"
Mutes the speaker.
Example2:
SEND_COMMAND TP,"'SVOL,100,1'"
Sets the speaker to 100 percent (maximum value).
Syntax:
"'TPAGEOFF'"
Example:
SEND_COMMAND TP,"'TPAGEOFF'"
Deactivates the page tracking option.
4" Color Touch Panels with Audio