AMX COLOR TOUCH PANELS WITH AUDIO (G3 FIRMWARE) Instruction Manual page 15

PIR, Microphone, IR and
Light Sensor locations
Install the 2-#6 drywall
clips and screws
(included) into the
A - Faceplate
(bezel)
FIG. 7 Wall Mount panel (AXD) installation configuration for drywall surfaces
Drywall clip set (clip and
screw) for installation
to plasterboard/drywall
FIG. 8 Wall Mount panel installation configuration for plasterboard
Don't disconnect the connectors from the touch panel. The unit must be installed with
the necessary connectors before being inserted into the drywall. Verify that the panel
is receiving power and functioning properly to prevent repetition of the installation.
4" Color Touch Panels with Audio
the holes
surfaces
Flat surface
(can include a
wall, podium, or
other level
surface)
2 notches are
required if the unit
is installed into a
drywall using the (2)
provided clips.
B - Main AXD unit consists of the touch
panel, internal components, and housing
Installation
11