Setting The Variable Text Code; Setting The Page Flip; Setting The Button Colors For Channel-Off Conditions - AMX COLOR TOUCH PANELS WITH AUDIO (G3 FIRMWARE) Instruction Manual

Designing Touch Panel Pages
4. Press
channel code number to identify the button and its programmed operations. The channel code
for non-active buttons is 0.
5. Press
page.

Setting the variable text code

The variable text buttons set the device and button channel codes for the buttons.
1. Press
2. Enter 1, 2, 3, or 4 in the keypad. The source code uses device codes 1 - 4 to identify the touch
panel.
3. Press
4. Press
5. Enter a channel value of 1 - 255 in the keypad. The source code uses the channel code number
to identify the button and its operations.
6. Press
page.

Setting the page flip

1. Press the Page
the
P
Page FLIP
type button
FIG. 29 Page FLIP Type button
2. Select a Page Flip type. If you select
P
AGE
3. Press the
desired page is not present in the menu, check to verify the page has been saved.
4. Select the target page for the page flip.

Setting the button colors for channel-off conditions

1. Press any button to open the Button Properties page.
2. Press
Select a color to set as the border.
3. Press the
the fill.
4. Press the
5. Press
return to the current page.
32
to open the keypad and enter a channel value of 1 - 255. The source code uses the
CHAN
to save the channel number, close the keypad, and return to the Button Properties
ENTER
to open the keypad and set the device number.
DEV
to save, close the keypad, and return to the Button Properties page.
ENTER
to open a keypad and set the channel number.
CHAN
to save the channel number, close the keypad, and return to the Button Properties
ENTER
FLIP STANDARD
menu.
F T
AGE LIP YPE
button appears.
button (FIG. 29) to open a list of all the saved touch panel pages. If the
FLIP P
TO AGE
under
BORDER CHANNEL OFF
button in the Button Properties page to open the palette. Select a color to set as
FILL
button to open the palette. Select a color to use for the text.
TEXT
in the Button Properties page to save the new button properties and
EXIT SAVE CHANGE
type button (FIG. 29) in the Button Properties page to open
in the
FLIP PREVIOUS
in the Button Properties page. The color palette appears.
Flip to Page button
menu, the
P FLIP T FLIP
AGE YPE
4" Color Touch Panels with Audio
TO