Table of Contents
Advertisement
Quick Arm:
User Code:
UNDERSTANDING THE LIGHTED KEYS
AWAY, STAY, NIGHT keys
ON when the system is armed to one of these respective modes.
OFF when it is disarmed.
FLASHES when there has been an alarm during the previous arm cycle.
BYPASS key
ON when any zone in this keypad's partition is bypassed.
OFF when no zones are bypassed.
NOTE: You must press and hold these keys for 2 seconds to activate these
functions. Your system may not be programmed for these activations.
Fire Key - If programmed, you can activate the Fire alarm by pressing the
Emergency Activation [Fire] key for two seconds. If your system is connected to a
monitoring center, an emergency report could be sent to that center. This key
should only be pressed in an emergency situation requiring response by fire
department personnel.
Auxiliary Key - If programmed, you can activate the auxiliary alarm by pressing
the Emergency Activation [Auxiliary] key for two seconds. If your system is
connected to a monitoring center, an emergency report could be sent to that
center. This key should only be pressed in an emergency situation requiring
response by emergency personnel.
4
An option that allows you to turn on (ARM) the security
system by double pressing either the [AWAY], [STAY], or
[NIGHT] key on the keypad (for ARMING only) as
programmed by the installing company.
A 4-digit or 6-digit entry code used to arm or disarm the
system.
EMERGENCY ACTIVATION KEYS
LCD Keypad
Advertisement
Table of Contents
