Emergency Activation Keys - GE NX-1348E-ICON User Manual

EMERGENCY ACTIVATION KEYS

NOTES: You must hold these keys for 2 seconds to activate these functions. Your system may not be programmed for
these activation keys. You should press these keys only in an emergency situation that requires response by emergency
personnel. If your system is programmed for these functions, the following reports can be sent.
Fire Key – This key can activate the fire alarm when pressed for two seconds. If your system is connected to a
monitoring center, an emergency report could be sent to that center.
Auxiliary Emergency Key – This key can activate the auxiliary alarm when pressed for two seconds. If your system is
connected to a monitoring center, an emergency report could be sent to that center.
Police (Panic/Hold-Up) Key - This key can sound a local audible alarm when pressed for two seconds. If your system is
connected to a monitoring center, an emergency report could be transmitted to that center. NOTE: Some Panic/Hold-Up
alarms are programmed to be silent at the protected site while reporting an alarm to the monitoring center. Check with
your installing company to determine how your security system will respond to the Panic/Hold-Up activation.
NX-1348E-ICON
g
GE Interlogix
- 5 -