Emergency Activation Keys - GE NetworX NX-1192E User Manual

VIII.

EMERGENCY ACTIVATION KEYS

NOTE: You must press and hold these keys for 2 seconds to activate these
functions. Your system may not be programmed for these activations.
Fire Key - If programmed, you can activate the Fire alarm by pressing the Emergency
Activation [Fire] key for two seconds. If your system is connected to a monitoring center,
an emergency report could be sent to that center. This key should only be pressed in an
emergency situation requiring response by fire department personnel.
Auxiliary Key - If programmed, you can activate the auxiliary alarm by pressing the
Emergency Activation [Auxiliary] key for two seconds. If your system is connected to
a monitoring center, an emergency report could be sent to that center. This key should
only be pressed in an emergency situation requiring response by emergency personnel.
Police (Panic/Hold-Up) Key - If programmed, when the Emergency Activation [Police]
key is pressed for two seconds, a local audible alarm will sound. If your system is
connected to a monitoring center, an emergency report could be transmitted to that
center. These keys should only be pressed in an emergency situation requiring
immediate response by law enforcement personnel. NOTE: Some Panic/Hold-Up
alarms are programmed to be silent at the protected site while reporting an alarm to the
monitoring center. Check with your installing company to determine how your security
system will respond to the Panic/Hold-Up activation.
13