Virtual Disk Copy Commands; Commands Listed Alphabetically; Activate Remote Replication Feature - Dell PowerVault MD3260 Cli Manual

Start Virtual Disk Initialization

Virtual Disk Copy Commands

Create Virtual Disk Copy
Recopy Virtual Disk Copy
Remove Virtual Disk Copy
Set Virtual Disk Copy
Show Virtual Disk Copy
Show Virtual Disk Copy Source Candidates
Show Virtual Disk Copy Target Candidates
Stop Virtual Disk Copy

Commands Listed Alphabetically

Following are the script commands listed alphabetically.

Activate Remote Replication Feature

NOTE: This command valid is only with Fibre Channel storage arrays.
This command creates the replication repository virtual disk and activates the Remote Replication premium feature.
When using this command, the replication repository virtual disk can be defined in one of three ways:
• User-defined physical disks
• User-defined disk group
• User-defined number of physical disks
If you choose to define a number of physical disks, the RAID controller module firmware chooses which physical disks
to use for the replication repository volume.
Syntax
User-Defined Physical Disks
activate storageArray feature=remoteReplication
repositoryRAIDLevel=(1 | 5 | 6)
repositoryPhysicalDisks=(enclosureID1,drawerID1,slotID1...
enclosureIDn,drawerIDn,slotIDn)
repositoryDiskGroupUserLabel=[diskGroupName]
physicalDiskMediaType=(HDD | SSD | unknown | allMedia)
physicalDiskType=(SAS)
[enclosureLossProtect=(TRUE | FALSE)]
[drawerLossProtect=(TRUE | FALSE)]
User-Defined Disk Group
activate storageArray feature=remoteReplication
repositoryDiskGroup=diskGroupName
[freeCapacityArea=freeCapacityIndexNumber]
User-Defined Number of Physical Disks
activate storageArray feature=remoteReplication
repositoryRAIDLevel=(1 | 5 | 6)
repositoryPhysicalDiskCount=numberOfPhysicalDisks
repositoryDiskGroupUserLabel=[diskGroupName]
96