Show Storage Array - Dell PowerVault MD3260 Cli Manual

Show Storage Array

This command returns configuration information about the storage array. The parameters return lists of values for the
components and features in the storage array. You can enter the command with a single parameter or more than one
parameter. If you enter the command with no parameters, the entire storage array profile is displayed (which is the
same information as if you entered the profile parameter).
Syntax
show storageArray (autoSupportConfig | profile | batteryAge
| connections | defaultHostType | healthStatus | hostTypeTable |
hotSpareCoverage | features | time | virtualDiskDistribution
longRunningOperations
| summary)
Parameters
Parameter
profile
autoSupportConfig
batteryAge
connections
defaultHostType
Description
Displays all properties of the logical and physical
components that comprise the storage array.
The information returned takes several screens to display.
NOTE: The profile parameter returns detailed
information about the storage array. The information
covers several screens on a display. You might need
to increase the size of your display buffer to see all
the information. Because this information is so
detailed, you might want to save the output of this
parameter to a file. To save the output to a file, enter
the show storageArray command similar to the
following:
smcli 123.45.67.89 -c "show
storagearray profile;" -o "c:\folder
\storagearray profile.txt"
NOTE: The previous command syntax is for a host
running Windows. The actual syntax varies
depending on your operating system.
The parameter to return information about the current
state of the operation to automatically collect support
data. The information this parameter returns is:
• Whether the operation is enabled or disabled
• The location of the folder where the support data
file is located
Displays the status, the age of the battery in days, and the
number of days until the battery needs to be replaced.
Displays a list of the drive channel port locations and the
drive channel connections.
Displays the default host type and host type index.
199