Cli Command Updates; New Commands; Updated Commands - Dell PowerVault MD3260 Cli Manual

CLI Command Updates

This chapter reflects new and updated commands that are available for use with Dell's PowerVault Modular Disk Series
of storage arrays.
NOTE: Not all commands are necessarily valid with all storage arrays - some commands are specific to certain
platforms.
CAUTION: Script commands are capable of changing the configuration and may cause loss of data if not used
correctly. Command operations are performed as soon as you run the commands. Before using the script
commands, ensure that you have backed up all data, and have saved the current configuration so that you can
reinstall it if the changes do not work.

New Commands

The following commands have been added to this guide to reflect the additional functionality available in the PowerVault
MD32 and MD36 series of arrays.
• Clear Storage Array Core Dump
• Clear Storage Array Recovery Mode
• Create Disk Pool
• Create RAID Virtual Disk on a Disk Pool
• Configure Automatic Support Bundle Collection
• Delete Disk Pool
• Delete Virtual Disk on a Disk Pool
• Display Automatic Support Bundle Collection Configuration
• Display Support Bundle Collection Schedule
• Enable Disk Pool Security
• Increase Virtual Disk Capacity on a Disk Pool
• Load Storage Array DBM Database
• Reduce Disk Pool Capacity
• Revive Disk Pool
• Set Disk Pool
• Show Disk Pool
• Stop Disk Pool Locate
• Schedule Support Bundle Collection Configuration

Updated Commands

The syntax of the following commands has been modified, updated, or enhanced since the last release of this document.
Note that not all commands are necessarily valid with all storage arrays. Some commands are specific to certain
platforms.
• Activate Remote Replication Feature
10
225