Delete Virtual Disk On A Disk Pool - Dell PowerVault MD3260 Cli Manual

Parameter
virtualDisk or virtualDisks
removeDiskGroup
schedule

Delete Virtual Disk On A Disk Pool

This command deletes virtual disks on a disk pool.
CAUTION: All of the data in the virtual disk is lost as soon as you run this command.
Syntax
delete (allVirtualDisks |
virtualDisk [virtualDiskName] |
virtualDisks [virtualDiskName1 ... virtualDiskNameN]
[removeDiskGroup=(TRUE | FALSE)
retainRepositoryMembers=(TRUE | FALSE)]
Parameters
Parameter
allVirtualDisks
virtualDisk or virtualDisks
removeDiskGroup
134
Description
NOTE: Using the allVirtualDisks parameter
deletes virtual disks until all are removed or until an
error is encountered. If an error is encountered, this
command does not attempt to delete the remaining
virtual disks.
Name of the virtual disk to delete. You can enter more
than one virtual disk name. You must put brackets ([ ])
around the virtual disk name. If the virtual disk name has
special characters, you must also put quotation marks (" ")
around the virtual disk name.
Deleting the last virtual disk in a disk group does not
delete the disk group. You can have a standalone disk
group (minus any virtual disks). To remove the standalone
disk group, set this parameter to TRUE. To keep
standalone disk groups intact, set this parameter to
FALSE.
Deletes only the schedule.
Description
This parameter deletes all of the virtual disks on a disk
pool.
The name of the virtual disk that you want to delete. You
can enter more than one virtual disk name. Enclose the
virtual disk name in square brackets ([ ]). If the virtual disk
name has special characters, you also must enclose the
virtual disk name in double quotation marks (" ").
Deleting the last virtual disk in a disk group does not
delete the disk group. You can have a standalone disk
group (minus any virtual disks). To remove the standalone
disk group, set this parameter to TRUE. To keep