Set Storage Array Isns Server Ipv6 Address; Set Storage Array Isns Server Listening Port; Set Storage Array Learn Cycle - Dell PowerVault MD3260 Cli Manual

Parameter
isnsIPv4Address

Set Storage Array iSNS Server IPv6 Address

This command sets the IPv6 address for the iSNS server.
Syntax
set storageArray isnsIPv6Address=ipAddress
Parameter
Parameter
isnsIPv6Address

Set Storage Array iSNS Server Listening Port

This command sets the iSNS server listening port.
Syntax
set storageArray isnsListeningPort=listeningPortIPAddress
Parameter
Parameter
isnsListeningPort
Additional Information
A listening port resides on the database server and is responsible for these activities:
• Listening (monitoring) for incoming client connection requests
• Managing the traffic to the server
When a client requests a network session with a server, a listener receives the actual request. If the client information
matches the listener information, then the listener grants a connection to the database server.

Set Storage Array Learn Cycle

This command sets the learn cycle for the battery backup unit. The learn cycle enables the MD storage management
software to predict the remaining battery life. Learn cycles run at set intervals and store the results for
software analysis.
Syntax
set storageArray learnCycleDate
(daysToNextLearnCycle=numberOfDays |
day=dayOfTheWeek) time=HH:MM
Description
The IP address that you want to use for the iSNS server.
Use this parameter with the static value for IPv4
configurations. If you choose to have a DHCP server set
the IP address for an IPv4 Internet iSNS server, you must
set the isnsIPv4Address parameter to 0.0.0.0.
Description
The IPv6 address that you want to use for the iSNS server.
Description
The IP address that you want to use for the iSNS server
listening port. The range of values for the listening port is
49152 to 65535. The default value is 3205.
185