Parameter
schedule
rollbackPriority
NOTE: When you use this command, you can specify one or more of the optional parameters. You can use any
combination of alphanumeric characters, hyphens, and underscores for the names. Names can have a maximum
of 30 characters.
NOTE: You can set the warningThresholdPercent parameter and the repositoryFullPolicy
parameter for both the snapshot repository virtual disk or the snapshot virtual disk.
Set Storage Array
This command defines the properties of the storage array.
Syntax
set storageArray autoSupportConfig (enable | disable) |
cacheBlockSize=cacheBlockSizeValue |
cacheFlushStart=cacheFlushStartSize |
cacheFlushStop=cacheFlushStopSize |
defaultHostType=("hostTypeName" |
hostTypeIdentifier)
failoverAlertDelay=delayValue |
mediaScanRate=(disabled | 1-30) |
password="password" |
userLabel="storageArrayName")
isnsRegistration=(TRUE | FALSE)
Parameters
Parameter
autoSupportConfig
Description
Use this parameter to schedule a snapshot operation, with
the following options:
•
immediate
•
startDate
•
scheduleDay
•
startTime
•
scheduleInterval
•
endDate
•
noEndDate
•
timesPerDay
•
timeZone
For more information, see Scheduling Snapshots.
Determines whether system resources must be allocated
to the rollback operation at the expense of system
performance. A value of 0 indicates that the rollback
operation is prioritized over all other host I/O. A value of 4
indicates that the rollback operation must be performed
with minimal impact to the host I/O.
Description
The setting for automatically collecting support data each time the
firmware detects a critical MEL event. This parameter has these
values:
181