Show Disk Group Import Dependencies; Show Disk Pool; Show Host Ports - Dell PowerVault MD3260 Cli Manual

Parameter
Parameter
diskGroup

Show Disk Group Import Dependencies

This command shows a list of dependencies for the physical disks in a disk group that you want to move from one
storage array to a second storage array.
Syntax
show diskGroup [diskGroupName] importDependencies
[cancelImport=(TRUE | FALSE)]
Parameters
Parameter
diskGroup
cancelImport
NOTE: This command returns the dependencies of a specific disk group, which must be in an Exported state or a
Forced state. If a decision is made to retain the listed dependencies, then the cancelImport parameter can be
enforced to spin the physical disks back down. You must run the show diskGroup importDependencies
command before you run the start diskGroup import command.

Show Disk Pool

This command returns information on the used and free capacity and other properties for the disk pool.
Syntax
show diskPool [diskPoolName]
Parameter
Parameter
diskPool

Show Host Ports

For all HBA host ports connected to a storage array, this command returns the following information:
• HBA host port identifier
• HBA host port name
• HBA host type
Description
Number of the disk group for which to display information.
You must put brackets ([ ]) around the disk group number.
Description
Number of the disk group for which to display information.
You must put brackets ([ ]) around the disk group number.
The setting to spin the physical disks back down after the
disk group dependencies have been read. To spin down
the physical disks, set this parameter to TRUE. To let the
physical disks stay spinning, set this parameter to FALSE.
Description
The alphanumberic identifier of the disk pool (including –
and _) that you want to set to a Complete state. Enclose
diskPoolName in square brackets ([ ]).
the
193