Checking Spelling - MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual

To set list properties for a list item:
In your draft, place the insertion point in the bulleted or numbered list item you want to change.
1
Note: If you select multiple items, the list properties option isn't available.
Do one of the following:
2
•
Select Format > List > Properties.
•
Right-click, select List, then select Properties.
Note: This option is not available for template-based pages or in tables.
The List Properties dialog box appears.
In the Selected item section, change options for the list:
3
•
Style specifies a style for the selected list item.
Options in the pop-up menu are specific to the list type, either bulleted or numbered.
•
Reset to number sets a specific number from which to number list item entries.
Click OK.
4
Contribute applies your changes to the list item.

Checking spelling

It's a good idea to use the Check Spelling command to check the spelling in your draft after you
add or edit text.
To check and correct spelling in your draft:
Click the Check Spelling button in the toolbar or select Format > Check Spelling.
1
If Contribute encounters an unrecognized word, the Check Spelling dialog box appears.
Select the appropriate option based on how you want Contribute to handle the discrepancy:
2
•
Click Add to Personal to add the unrecognized word to your personal dictionary. You can add
any word, and Contribute will ignore it in the future.
•
Click Ignore to ignore this instance of the unrecognized word.
•
Click Change to replace this instance of the unrecognized word with text that you type in the
Change to text box or with the selection in the Suggestions list.
•
Click Ignore All to ignore all instances of the unrecognized word.
•
Click Change All to replace all instances of the unrecognized word in the same manner.
When you finish checking spelling, click the Close button in the Check Spelling dialog box, or
3
click OK in the Spelling Check Completed message box.
Working with Text 69