MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual page 93

•
Select Table > Table Properties.
The Table Properties dialog box appears.
Make changes to any of the following options:
3
•
Table alignment refers to the location of the table in relation to any elements (such as text or
images) that appear around the table. Select from the following options:
Default aligns the table to the left side of the page, and does not flow text or images around
the table.
Left aligns the table to the left side of the page, and flows text or images to the right of
the table.
Center aligns the table in the center of the page.
Right aligns the table to the right side of the page, and flows text or images to the left of
the table.
•
Table width specifies how wide the table is.
From the pop-up menu, select Percent to indicate table width as a percentage of the total
browser window, or Pixel to indicate table width as a specific number of pixels (between 1
and 800).
Note: You can enter percentages that are greater than 100. For example, if you enter 150, then the table is one
and a half times the size of the browser window. When the percentage is greater than 100, a scrollbar appears
for the web page. You can enter a value up to 1000.
•
Border thickness specifies how thick the border around the table and between the cells is.
Tip: Enter 0 if you do not want a table border.
•
Cell padding indicates the amount of space, in pixels, between the edge of the table cell and
the contents of the cell.
Note: If you do not enter a value, Contribute sets cell padding to the default value, which is 1 pixel.
•
Cell spacing indicates the amount of space, in pixels, between each table cell.
Note: If you do not enter a value, Contribute sets cell spacing to the default value, which is 3 pixels.
Working with Tables 93